三峡库区龙门寨危岩体崩塌产生涌浪研究   总被引：1，自引：1，他引：0  

郑嘉豪  黄波林  张全  赵海林  冯万里  王健  陈小婷 《地质力学学报》2020,26(4):533-543

长江两岸高耸的危岩体对航道、沿岸居民带来巨大安全隐患。大宁河属于长江一级支流，龙门寨危岩体位于大宁河上，距离巫山县城仅1 km。利用FLOW-3D软件，模拟了145 m、175 m两种水位工况下龙门寨危岩体崩塌产生涌浪过程和涌浪传播过程。模拟结果表明，涌浪在145 m水位工况下最大浪高约为17.9 m，175 m水位工况下最大浪高约为11.6 m；在巫山县的五个码头处，两种水位工况最大涌浪爬高分别约为10.9 m、3.8 m；根据涌浪高度，对大宁河进行危险分区，145 m水位工况下极高危险区长度约4.4 km，很高危险区长度约1.9 km；175 m水位工况下极高危险区长度约3.0 km，很高危险区长度约1.0 km。研究结果有助于防控龙门寨危岩体潜在涌浪灾害危害，保障大宁河航道和巫山县码头安全，同时也为三峡库区滑坡涌浪灾害提供了预警依据。   相似文献   

浅析广安华蓥山区山水林田湖综合治理措施——以高顶山矿区为例     

李飞  裴云婧  王维  李德星  张春茂 《四川地质学报》2020,40(1):80-85

高顶山矿区位于广安华蓥市城区东南约5km处。长期的采矿活动,导致区内矿山地质环境问题突出,严重影响华蓥山地区人民的生命财产安全。矿山地质环境问题亟待解决。本文通过分析区内主要存在的矿山地质环境问题,提出通过矿山地质灾害、矿山土地恢复、矿山地形地貌景观恢复治理,河道综合整治、道路修复、生态保育、产业提升等措施;消除安全隐患,保障区内人民生命财产安全;改善生态环境,实现华蓥山地区生态环境全面恢复,生态环境质量提升,提高环境承载力,实现区内"山青、水秀、林美、田良"的目标。并对区内的产业转型升级进行了探讨,提出将高顶山矿区建设成具有科普和教育价值的旅游景观目的地;利用矿区独具特色工业人文景观和别致的自然景观,将高顶山矿区建设成集"科普、休闲、康养、户外、探秘"五大功能于一体的矿山公园,推动矿业经济转型升级,促进产业结构转型和经济社会可持续发展。  相似文献   

山东大尹格庄金矿床深部三维定量成矿预测     

陈进  毛先成  邓浩 《地球学报》2020,41(2):179-191

大尹格庄金矿是胶西北招平断裂带中段的大型金矿床,但随着逐渐的开采其保有资源量不断下降,急需在矿床的深边部区域开展接续资源找矿工作。本文以大尹格庄金矿为研究对象,以区域成矿理论和找矿勘查模型为指导,利用三维地质建模技术构建了相关地质体的三维模型,在此基础上,采用定量化的方法提取地质体与成矿相关的控矿因素指标和矿化指标,并建立了三维定量成矿预测模型,并应用该模型圈定了3个找矿靶区。研究表明,该方法能够适用于大中型矿山的深边部找矿工作,其三维及定量化的预测结果能够为后续的勘探及开采工作提供重要参考。  相似文献   

四川甲基卡锂矿伟晶岩转石分布区“3定2参”大比例尺填图法及其在青藏高原应用的意义   总被引：4，自引：0，他引：4  

刘善宝  王成辉  王登红  代鸿章  马圣钞  于扬  潘蒙  郝雪峰  杨荣 《地质学报》2020,94(1):326-332

我国西部地区无论是新疆阿尔泰还是地处青藏高原的西昆仑地区或是松潘-甘孜成矿带,都是我国伟晶岩型矿床找矿远景区,但要么剥蚀严重,要么第四系覆盖,难以找到好的地质露头。本文以地处青藏高原东南缘的川西甲基卡矿田为例,通过近10年来的实践,探索出一套在第四系覆盖严重但又有伟晶岩转石分布地区的填图找矿方法--"3定2参"1∶2000伟晶岩转石填图法,即:定伟晶岩转石类型、尺度、密度,参考矿区内伟晶岩脉产状和地形条件。实践证明,该方法能够快速有效识别伟晶岩转石类型(冰碛物、坡积物和原地或半原地型),并可进一步确定第四系覆盖区内伟晶岩脉的类型、产状及规模,为钻探工程部署提供依据。2019年在甲基卡经8个钻孔验证,在日西柯第四系覆盖区内发现16条花岗伟晶岩脉,其中锂辉石伟晶岩脉10条,实现了新的找矿突破。这一方法同样在可尔因矿集区适用,并指导2019年"松潘-甘孜成锂带锂铍多金属大型资源基地综合调查评价"项目在上述两个地区实施钻探验证,初步探获新增氧化锂资源量超过15万吨,值得进一步推广应用。  相似文献   

An efficient and robust approach to predict ship self-propulsion coefficients     

《Applied Ocean Research》2019

Achieving a reliable and accurate numerical prediction of the self-propulsion performance of a ship is still an open problem that poses some relevant issues. Several CFD methods, ranging from boundary element methods (BEM) to higher-fidelity viscous Reynolds averaged Navier–Stokes (RANS) based solvers, can be used to accurately analyze the separate problems, i.e. the open water propeller and the hull calm water resistance. However, when the fully-coupled self-propulsion problem is considered, i.e. the hull advancing at uniform speed propelled by its own propulsion system, several complexities rise up. Typical flow simplifications adopted to speed-up the simulations of the single analysis (hull and propeller separately) lose their validity requiring a more complex solver to tackle the fully-coupled problem. The complexity rises up further when considering a maneuver condition. This aspect increases the computational burden and, consequently, the required time which becomes prohibitive in a preliminary ship design stage.The majority of the simplified methods proposed in literature to include propeller effects, without directly solve the propeller flow, in a high-fidelity viscous solver are not able to provide all the commonly required self-propulsion coefficients. In this work, a new method to enrich the results from a body force based approach is proposed and investigated, with the aim to reduce as much as possible the computational burden without losing any useful result. This procedure is tested for validation on the KCS hull form in self-propulsion and maneuver conditions.  相似文献   

Facies and sequence stratigraphic architecture of the Mural Limestone (Albian), Arizona: Carbonate response to global and local factors and implications for reservoir characterization     

Rachel Aisner-Williams  Charles Kerans 《Sedimentology》2020,67(7):3735-3768

This study documents the detailed facies and sequence stratigraphic architecture of a multi-cyclic patch-reef and its associated ramp interior facies that formed during Oceanic Anoxic Event 1b in the Mural Limestone, Arizona, USA. Ramp interior facies are comprised of bedded wackestone/packstone, rudist build-up and coral–algal patch-reef facies located north of Bisbee, Arizona, at the Grassy Hill locality. The larger multi-cyclic patch-reef that developed coevally ca 5 km to the south of Grassy Hill consists of a high-angle windward margin with a narrow ca 70 m long reef frame containing vertically zonated Microsolena, Actinastrea, diverse branching coral and rudist assemblages, and an 870 m long low-angle leeward margin comprised of reef debris rudstone and grainstone shoal facies. Similar reef geomorphology and orientation is documented across the Gulf of Mexico and reflects the shelf-wide north to north-east-trending prevailing wind and current energies. Controls affecting reef formation and growth patterns include changes in accommodation space associated with low-amplitude global sea-level rise and regional thermotectonic subsidence, local accommodation space and nutrient fluctuations associated with the inner shelf depositional setting within a humid and siliciclastic-rich environment. Four aggradational to retrogradational high-frequency sequences are documented in Arizona: High-frequency sequences 1 and 2 represent the first pulse of patch-reef development in an overall second-order marine transgression over the Sonora/Bisbee Shelf. These sequences correlate to δ¹³C signatures associated with Oceanic Anoxic Event 1b across the Gulf of Mexico and suggest that carbonate reefs persisted on the ramp interior during this time. High-frequency sequences 3 and 4 record a second brief transgression and backstepping of reef facies followed by the final regression of shallow shelf carbonates that correlates to more robust patch-reef development in Sonora, Mexico. The patch-reef at Paul Spur is an excellent outcrop analogue for productive patch-reefs in the Maverick Basin (Comanche Shelf) of Texas. Detailed facies mapping of this outcrop analogue shows that the greatest reservoir potential is contained within the backreef grainstone shoals where primary porosity of up to 15% is observed.  相似文献   

The spatial local accuracy of land cover datasets over the Qiangtang Plateau,High Asia     

Liu  Qionghuan  Zhang  Yili  Liu  Linshan  Li  Lanhui  Qi  Wei 《地理学报(英文版)》2019,29(11):1841-1858

We analyzed the spatial local accuracy of land cover (LC) datasets for the Qiangtang Plateau, High Asia, incorporating 923 field sampling points and seven LC compilations including the International Geosphere Biosphere Programme Data and Information System (IGBPDIS), Global Land cover mapping at 30 m resolution (GlobeLand30), MODIS Land Cover Type product (MCD12Q1), Climate Change Initiative Land Cover (CCI-LC), Global Land Cover 2000 (GLC2000), University of Maryland (UMD), and GlobCover 2009 (Glob-Cover). We initially compared resultant similarities and differences in both area and spatial patterns and analyzed inherent relationships with data sources. We then applied a geographically weighted regression (GWR) approach to predict local accuracy variation. The results of this study reveal that distinct differences, even inverse time series trends, in LC data between CCI-LC and MCD12Q1 were present between 2001 and 2015, with the exception of category areal discordance between the seven datasets. We also show a series of evident discrepancies amongst the LC datasets sampled here in terms of spatial patterns, that is, high spatial congruence is mainly seen in the homogeneous southeastern region of the study area while a low degree of spatial congruence is widely distributed across heterogeneous northwestern and northeastern regions. The overall combined spatial accuracy of the seven LC datasets considered here is less than 70%, and the GlobeLand30 and CCI-LC datasets exhibit higher local accuracy than their counterparts, yielding maximum overall accuracy (OA) values of 77.39% and 61.43%, respectively. Finally, 5.63% of this area is characterized by both high assessment and accuracy (HH) values, mainly located in central and eastern regions of the Qiangtang Plateau, while most low accuracy regions are found in northern, northeastern, and western regions.

  相似文献   

大地水准面高的计算及其在海底地形反演中的应用     

范雕  李姗姗  苏明晓  孟书宇  邢志斌  张驰  冯进凯 《海洋技术学报》2019,38(5)

为充分挖掘海洋重力数据在反演海底地形中的应用潜力,尝试探索利用大地水准面高反演海底地形的技术途径,并以夏威夷—皇帝海山链拐点所在海区作为反演试验区进行验证。首先采用Belikov列推法计算伴随(缔和)勒让德函数,利用EIGEN-6C4地球重力场模型解算获取了分辨率为1'的大地水准面高格网数值模型;然后通过综合分析反演比例函数和转换函数特点、研究海区大地水准面高与海底地形的相干特性以及大地水准面高本身尺度特征,获得了利用大地水准面高反演海底地形的频段范围;最终以试验海区大地水准面高为数据输入,构建了相应的海底地形模型(BNT模型),并与ETOPO1等海深模型进行比对分析。试验结果表明:BNT模型检核差值在一倍均方差范围检核点数量占比70.60%,相比正态分布更加集中;BNT模型检核精度低于ETOPO1等海深模型;海深模型检核精度随着水深增加不断提升,水深小于1 000 m时,海深模型相对误差出现较大发散现象;计算海域ETOPO1模型精度最高,GEBCO模型和DTU10模型检核精度相当。  相似文献   

鄂尔多斯盆地北部东胜地区侏罗系—白垩系钻孔数据库与三维地质模型          下载免费PDF全文

张天福  张云  程先钰  孙立新  程银行  周小希  王少轶  马海林  鲁超 《中国地质》2020,47(S1):220-230

随着砂岩型铀矿找矿工作的进一步开展，其对以往钻孔资料集成应用的需求尤为迫切。在煤田钻孔资料“二次开发利用”和“煤铀兼探”新方法、新思路的指导下，通过采集东胜地区钻孔资料属性数据，按照统一的标准和要求，将煤田、铀矿等类型的重要钻孔资料，通过整理、扫描、数据类型转换、录入和集成，建成了东胜地区侏罗系—白垩系综合钻孔数据库，实现了对多源钻孔数据的统一管理。该数据库共包含3个Access数据库和相应的成果图件。每个Access数据库均包含钻孔基本信息表、综合柱状分层表、岩性描述分层表、地层名称及代号表、地层颜色表、测井曲线数据表、测井曲线配置表和钻孔弯曲度测量数据表等8张数据表，分别详细记录了地质编录岩性信息、地层分层信息、岩石颜色信息、测井曲线信息、水文分层信息、钻孔样品采样信息、弯曲度测量信息等。通过应用实践，该钻孔数据库成果可实现连井剖面、含煤含铀目的层的顶底板标高、地层等厚图、砂体等厚图及含砂率图等重要基础地质图件的快速生成，从而提高数据的使用效率并为铀矿勘查及研究工作提供重要数据基础。  相似文献   

基于正交匹配追踪的声层析方法   总被引：2，自引：0，他引：2  

李倩倩  史娟  李整林  罗宇  阳凡林  张凯 《海洋学报(英文版)》2019,38(11):149-157

声速剖面的变化会对声传播产生较大的影响，经验正交函数模型经常用来实现对声速剖面数据的简化描述。然而在内波、湍流等海水不均匀性存在时，这种正则化操作会造成声速重构精度的大幅降低。本文利用字典学习生成声速剖面的非正交原子，在稀疏编码时采用正交匹配追踪（OMP，Orthogonal Matching Pursuit）算法，更新字典则使用KSVD （Kernel Singular Value Decomposition）的字典更新算法。由于字典学习不需要强制使用正交条件，对于训练数据更加灵活，从而可以使用少数的原子组合达到更高的重构精度。利用一次浅海声学实验多次测量的声速剖面研究了海水声速剖面的经验正交函数表示和字典学习，研究表明：相比于正交函数表示，学习字典可以利用少数原子（甚至一个原子）更好的解释声速剖面扰动。字典学习可以提高声速剖面的稀疏性，从而提高声速剖面的反演精度。  相似文献